We ship FedEx and LTL freight directly to buyers in the continental USA.
A separate shipping invoice is sent once your order is ready for shipment.
Buyers in Alaska, and Hawaii, please contact us to order.
A separate shipping invoice is sent once your order is ready for shipment.
Buyers in Alaska, and Hawaii, please contact us to order.
The V-5 anchor will receive our bronze cap once the work is complete.
The V-18 and V-24 permanent ridge anchors (no cap required) allow the anchor ropes to be set remotely for increased safety, and also allow the user to work either side of the roof and keep their anchor point within line of sight. They also allow for full continuous last person down fall protection safety.
V-18, V-24 Anchor Bars
$295.00 - $355.00
Architect's Favorite.
Vertically adjustable. Inspectable. Zero maintenance Stainless Steel. Historic Aged finish.
For every 8 single purchase (of the same bar) you get 2 extra for FREE (20% discount).
Let us know in the comments at checkout to add the 2 extra bars per 8 you purchase.
For metal, slate, asphalt shingle, and more.
Durable 17/4 Stainless Steel.
Precision machined rope friendly edges for LAST MAN DOWN continuous fall protection.
Hardened and "aged" for maximum strength and beauty.
Completely inspectable hardware. No risky buried fasteners.
No welds to inspect or fail.
CUSTOM MOUNTING BRACKETS SOLD SEPARATELY TO MEET ROOF PITCHES AND YOUR SPECIFIC SITUATION.
Compatible with wood rafters and 2x4 roof truss systems.
Load in ANY direction: Meets OSHA's 5,000 pound anchor load requirement.
Wood blocking required for loads not parallel to the rafter/truss.
Vertically adjustable for varying roof thicknesses and ridge finishes.
Works with or without a ridge board present.
Patent No.: US 12,415,103 B1
Made in the USA.
RIDGE BRACKETS for anchor bars
$195.00
Custom made for your job.
Shipping is usually within 1-2 weeks after your order is placed.
Durable Stainless Steel Mounting Brackets
Grade 8 plated hardware for your specific mounting situation included.
Completely inspectable from the safety of the attic.
No risky buried fasteners.
No welds to inspect or fail.
Compatible with wood rafters and 2x4 roof truss systems.
Load in ANY direction: Meets OSHA's 5,000 pound anchor load requirement.
Wood blocking required for loads not parallel to the rafter/truss.
Vertically adjustable in 3/4" increments for varying roof thicknesses and ridge finishes.
Works with or without a ridge board present.
Patent No.: US 12,415,103 B1
Made in the USA.
BERMUDA brackets for HIPS and MORE ...
$295.00
Custom made for your job.
Bermuda Style brackets are custom made for each order.
Plan for up to a 4 week lead time (although it's usually 2 weeks) to ship after we receive all necessary information.
Brackets allows the V-18 and V-24 anchor bars to be mounted to a suitable roof rafter. Holes are designed for 3/8" bolts (not provided). Anchor bar sold separately.
Anchor brackets are 7 gauge (3/16" thick) #304 stainless steel. Contact us for installation instructions for your specific scenario.
V-5 Permanent Roof Anchor
$265.00 - $285.00
Simple, discreet, totally inspectable fall protection anchor point.
Mount Vernon (George Washington's copper roof shown).
3/8" stainless steel anchor system bolts through and around the roof rafter.
No risky "buried" hidden fasteners.
3/8" grade 8 bolts and hardware.
Ideal for use with standard roof sheathing and up to 1/4" thick slate, cedar shake and asphalt shingle roofs.
The standard V-5 is NOT suitable for use with horizontal lifeline systems (Our V-18 and V-24 permanent ridge anchors are suitable for use with engineered horizontal lifeline systems).
Easy to inspect from the attic prior to use.
Do not use if the anchor has been deformed, the rafter is damaged or if the bolts have loosened.
Installation checklist and inspection tag included.
Our copper and bronze flashing system is sold separately.
The V-5 anchor is in conformance with OSHA 1926 and OSHA 1910 for a single person tie-off in the plane of the anchor (parallel to the rafter) when the installation instructions are followed.
Copper/Bronze Flashing System
$275.00
Shown - our standard copper flashing plate (11.75" wide x 17.75" long) with our durable cast bronze base soldered in place. Includes sand cast bronze cap with copper, bronze and brass hardware. Scroll down and view the cap installation video. The dark bronze cap is standard and has a built-in weep notch on the lower end. The copper flashing plate may be requested in custom sizes.
Custom sizes are available by request.
V-1 Reusable Temporary Anchor (sold in groups of 2)
$198.00
Elite Roofer's Favorite
If you want to know how good a product is, closely examine what's it's made from, how it's made, how it's installed, and what the PRO's think.
Our V-1 anchor is made in America (ISO 9001:2015 facility). The precisely formed, milled, and expertly TIG welded 7 gauge V-1 stainless steel anchor meets OSHA 1910 and 1926 requirements for one worker when installed through roof sheathing into a suitable roof rafter using (6) TimberLOK 4" hex-drive structural wood screws. As you will see in the video below, it installs simply and quickly with an impact driver.
Each order comes with 12 fasteners and a 5/16" hex drive. Additional fasteners are easily available at building supply retailers or buy a bucket of 250 fasteners online.
Recommended for best use with Petzl's triact-locking Vulcan or Oxan carabiners (available for purchase through our custom packages or any Petzl product dealer).
Turret photo courtesy of Jenkin's Slate Masters.
2" STAINLESS STEEL PLUMBING VENT STACK - SLATE ROOF
$495.00
1/4" stainless steel base (cut the same size as your slate) fully welded to a 2" schedule 40 stainless steel through pipe.
Our system installs just like a piece of slate and requires zero flashing.
Simply connect the plumbing in the attic to the underside of this pipe with a 2" rubber fernco. These photos show (2) leaking vent stacks being removed and combined in the attic, then rerouted to the new stack on the rear of this home.
Finish: Sanded stainless steel unless you request powder coating for an additional charge.
SLATOR Roof Bracket
$250.00
Favorite Access Tool since 2014.
Sold exclusively at STORTZ.COM.
888-847-3456
Workers use the SLATOR bracket to firmly hold a ladder on steep pitch roofs. A FAVORITE tool of slate repair workers since 2014, it's also gaining popularity for installing standing seam panels on steep roofs as you work your way across the roof installing each new panel.
Each SLATOR bracket comes with enough fasteners for 1 installation and a 5/16" hex driver bit.
The SLATOR conforms with OSHA 1926, 1910 requirements for fall protection when installed and used according to the instructions. It fastens to a steep slate, asphalt shingle or cedar shake roof and firmly clamps a ladder into position, allowing tradesman easier and safer access to perform their work. Used properly, the SLATOR will help protect the roof from wear and tear, save you time, energy, and perhaps, your life. Watch the tutorials and gain easier and safer access to do your best work safely.
"OJ" Eave detail Jig for 1" double lock metal
$35.00
Killer details set you apart.
Sold exclusively at STORTZ.COM
Our heavy duty hardened stainless steel jig ... so each member of your team (even the newbies!) will be making the same beautiful, easily repeatable curved eave details that will impress your clients.
The rear end of this jig has two points set 8mm apart to help measure and scribe the female portion after the male side has been cut.
The roof material shown in these photos is Roofinox (.019 stainless)
Custom Gear Packages
$1,500.00
Harnesses, ropes, mobile fall arresters, carabiners, tool bags, tool tethers, helmets, anchors, instruction ... etc.
Custom Petzl, PMI, and SLATOR gear packages to help you do your work safely.
Prices vary of course based on what and how many items you need.
Need help getting the best gear to do your steep roof work?
Just ask.
All the SLATOR brand products are manufactured in the United States by talented machinists and craftsman.
Many of our products are manufactured in a machine shop with AS9100D Certified, ISO9002:2015 credentials.
Material certifications are available upon request with this facility.
Many of our products are manufactured in a machine shop with AS9100D Certified, ISO9002:2015 credentials.
Material certifications are available upon request with this facility.
