V-5 Permanent Roof Anchor
The patent-pending V-5 permanent anchor system consists of the anchor plate (3/8"stn. stl.), backer plate (1/8"stn. stl.) and pressure plate (1/8"stn. stl.), 3/8" grade 8 bolts and hardware. It's ideal for use with standard roof sheathing and up to1/4" thick slate, cedar shake and asphalt shingle roofs. If we are out of stock, call us for pricing and lead time. Prices change based on the current market price and availability of stainless steel.
The flashing system must be purchased separately.
The standard V-5 is NOT suitable for use with horizontal lifeline systems (The V-8 is suitable for use with a horizontal lifelines).
Inspect prior to every use and at the end of use.
Do not use if the anchor has been deformed or if the bolts have loosened.
Remove from service if the anchor is deformed.
Custom anchor sizes are available upon request to meet specific loading scenarios.
Contact us for custom gear packages with ropes, carabiners and other gear.
We will call you after your order to select the proper bolt length for your installation.
On an existing slate roof, with easy access to the attic, this turn-key process takes 2 skilled roofers about 75 minutes (once they have access to the anchor location on the roof). On an asphalt shingle roof, the most difficult part may be separating the shingles.
Once done, the low profile anchor and bronze/copper flashing kit will provide anchor protection indefinitely.